EBV Elektronik
Products Franchises Services Events Locations About EBV Home Sitemap Contact

Consolidated Power on one Chip (ISL6441 & ISL6443A)   

  

 

ISL6441 and ISL6443A are chip solutions combining dual downward switching controllers and LDO controllers. With a high input voltage range, they are used to operate external FETs. The 180-degree phase shift of the two PWM controllers provides for a uniform input current. It is possible to synchronise multiple switching controllers. Independent monitoring inputs permit controlled power-up and powerdown. The additional linear controller offers the facility to continue generating a standby voltage with low closed-circuit current when PWM controllers are switched off, for example. Applications are to be found in modems or routers, DSPs, ASICs, FPGAs, set-top boxes and elsewhere in the telecommunications field.

 

 

ISL6441


Key Features

  • Wide Input Supply Voltage Range
    • 5.6 V to 24 V
    • 4.5 V to 5.6 V
  • Three Independently Programmable Output Voltages
  • Switching Frequency 1.4 MHz
  • Out of Phase PWM Controller Operation
    • Reduces Required Input Capacitance and Power Supply Induced Loads
  • No External Current Sense Resistor
    • Uses Lower MOSFET’s rDS(ON)
  • Bi-directional Frequency Synchronization for Synchronizing Multiple ISL6441s
  • Programmable Soft-Start
  • Extensive Circuit Protection Functions
    • PGOOD
    • UVLO
    • Overcurrent
    • Overtemperature
    • Independent Shutdown for Both PWMs
  • Excellent Dynamic Response
    • Voltage Feed-Forward with Current Mode Control
  • QFN Package:
    • QFN - Compliant to JEDEC PUB95 MO-220 QFN - Quad Flat No Leads - Package Outline
    • Near Chip Scale Package footprint, which improves PCB efficiency and has a thinner profile


Applications

  • Power Supplies with Multiple Outputs
  • xDSL Modems/Routers
  • DSP, ASIC, and FPGA Power Supplies
  • Set-Top Boxes
  • Dual Output Supplies for DSP, Memory, Logic, µP Core and I/O
  • Telecom Systems

 


Related Links

Webpage Intersil ISL6441
Datatsheet Intersil ISL6441
(PDF 382 kB)
Intersil Web based Simulation
Getting started with Intersil's Web based Simulation (PDF 192 kB)
Java™ Plug-in Setup Instructions for Intersil's Web based Simulation
(PDF 335 kB)

 

ISL6443A


Key Features

  • Wide Input Supply Voltage Range
    • Variable 5.6 V to 24 V
    • Fixed 4.5 V to 5.6 V
  • Three Independently Programmable Output Voltages
  • Switching Frequency 300 kHz
  • Out of Phase PWM Controller Operation
    • Reduces Required Input Capacitance and Power Supply Induced Loads
  • No External Current Sense Resistor
    • Uses Lower MOSFET’s rDS(ON)
  • Bidirectional Frequency Synchronization for Synchronizing Multiple ISL6443As
  • Programmable Soft-Start
  • Extensive Circuit Protection Functions
    • PGOOD
    • UVLO
    • Overcurrent
    • Over-temperature
    • Independent Shutdown for Both PWMs
  • Excellent Dynamic Response
    • Voltage Feed-Forward with Current Mode Control
  • QFN Packages:
    • QFN - Compliant to JEDEC PUB95 MO-220 QFN - Quad Flat No Leads - Package Outline
    • Near Chip Scale Package Footprint, which Improves PCB Efficiency and has a Thinner Profile
       

Applications

  • Power Supplies with Multiple Outputs
  • xDSL Modems/Routers
  • DSP, ASIC, and FPGA Power Supplies
  • Set-Top Boxes
  • Dual Output Supplies for DSP, Memory, Logic, μP Core and I/O
  • Telecom Systems


Please note that there is an Evaluation Board available - read more in the Application Note below!

 


Related Links

Webpage Intersil ISL6443A
Datasheet Intersil ISL6443A 
(PDF 300 kB)
Application Note Intersil ISL6443AEVAL2Z Evaluation Board

(PDF 408 kB)
Webpage Intersil Broadband

 


   Contact your Local EBV Sales Office for more information.

 
 
 
TERMS AND CONDITIONS     PRIVACY     LEGAL NOTICES     IMPRINT Print Print